Port And Button Description - TP-Link RE315 User Manual

Chapter 1
Name
(Power)
(Signal)
2.4G
5G
1 2 2

Port and Button Description

Button
(WPS)
Reset
Ethernet Port
Status
On/Off The extender is on or off.
Blinking The system is starting up or firmware is being upgraded.
The extender is connected to your router's wireless
Solid white
network and is in a suitable location.
The extender is experiencing poor signal strength. Try
Solid red
relocating it closer to your host router.
Blinking WPS connection is in progress.
Off No wireless connection is established.
The extender is connected or not connected to the
On/Off
2.4GHz wireless network of your host router.
The extender is connected or not connected to the 5GHz
On/Off
wireless network of your host router.
Press the WPS button on your host router, and immediately press
this button on the extender for 1 second. The
should change from blinking to solid on, indicating successful WPS
connection.
Use a pin to press the button for 1 second to reset the extender.
Connect your Ethernet-only device to the Ethernet port of the extender
to join the network.
Get to Know About Your Extender
Indication
Description
LED of the extender
4