Method 3: Via The Wps Button - TP-Link RE315 User Manual

Chapter 2
Tip:
If you connect the extender to a TP-Link OneMesh router and a success screen as below appears at the end of the
setup, the extender has successfully joined the router's OneMesh network and copied the router's wireless settings.
For more information, refer to
2 2 3

Method 3: Via the WPS Button

Use this way if your router has a WPS button. The button might look like one of these:
.
1. Press the WPS button on your host router, and then press the WPS button on the
extender for 1 second within 2 minutes.
OneMesh with Seamless Roaming.
Set Up Internet Connection
12