TP-Link RE315 User Manual page 53

FAQ
Q1 How to reset the extender to its factory default settings?
• With the extender powered on, use a pin to press the
extender will reboot.
• Log in to the extender's web management page. Go to
Backup & Restore
Q2 What should I do if I forget my login password?
• If you are using a TP-Link ID to log in, or you have enabled the Password Recovery
feature of the extender, click
instructions to reset it.
• Refer to FAQ > Q1 to reset the extender, and then visit
create a new login password.
Note:
The extender must be reconfigured after a reset to access the internet. Please note down your login password for
future logins.
Q3 What should I do if I forget my wireless password?
In Range Extender mode, the extender shares the same wireless passwords as those
of your host networks.
In Access Point mode, please connect your computer to the extender using an Ethernet
cable and follow the steps below:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Wireless to retrieve or reset your wireless password.
Q4 What should I do if I can't access the web management page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• If your computer is wirelessly connected, make sure that you have connected to the
extender's SSID.
• If your computer is connected via an Ethernet cable, please make sure that the
connection is stable.
• Make sure your computer is configured as
Obtain DNS server address
• Verify that http://tplinkrepeater.net
Enter.
and click FACTORY
Forgot Password?
automatically.
is correctly entered in the web browser and press
Reset
RESTORE.
on the login page and then follow the
Obtain an IP address automatically
button for 1 second. The
Settings > System Tools
http://tplinkrepeater.net
>
to
and
50