Advertisement
Assemble Column to Base
3
Attach the column (part 6) to the base (part 1) using the M8 washers (part 3), M8 x 50mm screws
(part 4) and the 5AF hex key (part 5). Once base is fixed, return the stand to an upright position.
Optional: Bolting the Stand to the floor
Remove the hole caps (part 2) and adjustable rubber feet from the base (part 1).
Pre-drill holes in floor and using suitable ground anchor fixings (not supplied), fix stand to floor.
8
6
1
1
2
ADJUSTABLE
RUBBER FOOT
3
4
5
1
GROUND ANCHOR
Advertisement
