Power Problems - Dell Studio XPS Studio XPS 16 Setup Manual

The link integrity light on the integrated network
connector lets you verify that your connection is
working and provides information on the status:
• Green — A good connection exists between
a 10-Mbps network and the computer.
• Orange — A good connection exists between
a 100-Mbps network and the computer.
• Yellow — A good connection exists between
a 1000-Mbps network and the computer.
• Off — The computer is not detecting a
physical connection to the network.
NOTE: The link integrity light on the network
connector is only for the wired cable
connection. The link integrity light does not
provide status for wireless connections.

Power Problems

The power/battery lights on the hinges indicate
the following:
On Battery Power:
• Solid white - computer is running on battery
power
• Solid amber - battery is low
• Flashing amber - battery is critically low
On AC Adapter:
• Solid white - computer is powered on and
battery is charged
• Blinking white - computer is in a standby state
If the power light is off — The computer is
either turned off or is not receiving power.
• Remove the AC adapter and try turning on
the computer with only the battery.
• Remove the battery and try turning on the
computer with only the AC adapter.
• Check both ends of the AC adapter cable
connections. Ensure that the light on the
AC adapter is on. If the light is not on,
try plugging the AC adapter into another
electrical outlet.
Solving Problems
29