Setting Up The 5.1 Audio Connections - Dell Studio XPS Studio XPS 16 Setup Manual

• Select Custom setup,
– Follow the instructions given.
– In the Optional Setup screen, choose
Configure tuners, TV signal, and Guide.
– Click Next and confirm your region.
To re-setup the TV Tuner, if required:
Follow this procedure if you have launched
Media Center previously.
1. Double-click on the Media Center icon on
the desktop.
2. Go to Main Menu → Tasks → Settings →
TV → Set up TV Signal → Confirm Your
Region.
Setting Up Your Studio XPS Laptop
Setting Up the 5.1 Audio
Connections
To set up the 5.1 audio connections:
Click Start → Control Panel → Additional
Options. Run IDT Audio Control Panel. In the
Jacks tab, there are three connector icons.
Follow the instructions to finish the setup.
1. Click the microphone icon, select
Rear Speakers, and plug your rear speaker
cable to the audio in/microphone connector.
2. Click the middle headphone icon, select
Device: Center/LFE Speaker, and plug your
center/woofer speaker cable to the middle
audio out/headphone connector.
Click the right headphone icon, select
3.
Device: Front Speaker, and plug your
front speaker cable to the right audio out/
headphone connector.
Device:
11