Dell Studio XPS Studio XPS 16 Setup Manual page 39

3. When the DELL logo appears, press <F12>
™
immediately. Select Diagnostics from the
boot menu and press <Enter>.
NOTE: If you wait too long and the
operating system logo appears, continue to
wait until you see the Microsoft
desktop; then, shut down your computer
and try again.
NOTE: If you see a message stating that no
diagnostics utility partition has been found,
run the Dell Diagnostics from the Drivers
and Utilities disc.
4. Press any key to start the Dell Diagnostics
from the diagnostics utility partition on your
hard drive.
Starting Dell Diagnostics From the Drivers and
Utilities Disc
1. Insert the
Shut down and restart the computer.
2.
When the DELL logo appears, press <F12>
Windows
® ®
immediately.
NOTE: If you wait too long and the
operating system logo appears, continue to
wait until you see the Microsoft
desktop; then, shut down your computer
and try again.
NOTE: The next steps change the boot
sequence for one time only. On the next
start-up, the computer boots according to
the devices specified in the system setup
program.
When the boot device list appears, highlight
3.
CD/DVD/CD-RW and press <Enter>.
Using Support Tools
Drivers and Utilities disc.
Windows
® ®
37