Setting Up 5.1 Audio Connections - Dell Studio XPS 1340 Setup Manual

Setting Up Your Studio XPS™ Laptop
4. Select either Broadband (PPPoE) or Dial-up,
depending on how you want to connect:
a. Choose Broadband if you will use a DSL,
satellite modem, cable TV modem,
or wireless technology connection.
b. Choose Dial-up if you will use an optional
USB dial-up modem or ISDN.
NOTE: If you do not know which type of
connection to select, contact your ISP.
5. Follow the instructions on the screen and
use the setup information provided by your
ISP to complete the setup.

Setting Up 5.1 Audio Connections

To set up 5.1 audio connections:
Click Start → Control Panel→ Additional
Options. Run IDT Audio Control Panel. In the
Jacks tab, there are three connector icons.
Follow the instructions to finish the setup.
12
1. Click the microphone icon, select
Rear Speakers, and plug your rear speaker
cable to the audio in/microphone connector.
2. Click the middle headphone icon, select
Device: Center/LFE Speaker, and plug your
center/woofer speaker cable to the middle
audio out/headphone connector.
3. Click the right headphone icon, select
Device: Front Speaker, and plug your
front speaker cable to the right audio
out/headphone connector.
Device: