Kenwood KRC-PS959R Instruction Manual page 44

Troubleshoot ing Guide
PROBLEM
The memory is erased w hen
the ignition is turned off.
The TEL mute function does
not w ork.
The TEL mute function turns on
even though the TEL mute
cable is not connected.
The faceplate does not open or
close.
Disc control mode
PROBLEM
The disc control mode cannot
be selected.
The specified disc does not
play, but another one plays
instead.
The sound skips.
The display show s that the
changer is being played, but no
sound can be heard.
The specified track does not
play.
Downloaded from: http://www.usersmanualguide.com/
POSSIBLE CAUSE
The battery cable has not been connected to the proper
terminal.
The ignition and battery cable are incorrectly connected.
The TEL mute cable is not connected properly.
The TEL mute cable is touching a metal part of the car.
The ambient temperature is too low .
POSSIBLE CAUSE
No cable has been connected to the disc changer input
terminal on the unit.
The specified CD is very dirty.
The CD is upside-dow n.
The disc is loaded in a different slot from that specified.
The disc is severely scratched.
Something is touching the disc changer.
The CD is scratched or dirty.
The computer chip in the unit is not functioning normally.
Random play or magazine random play has been selected.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
Pull the TEL mute cable aw ay from the metal part of the car.
Warm up your car.
Connect the cable to the disc changer input terminal on the
unit.
Clean the CD.
Load the CD w ith the labelled side up.
Eject the disc magazine and check the number for the
specified disc.
Try another disc instead.
Remove w hatever is touching it.
If skipping happens at the same place w hen the car is
stopped, something is w rong w ith the CD. Clean the CD.
Press the reset button on the unit (see page 4).
Turn off the random play or magazine random play function.
— 44 —
SOLUTION
SOLUTION