Quick Setup - Dell Latitude XT2 XFR Setup And Features Information

Dell
4. The door is now in its open position.
5. Reverse the procedure to close and lock the door.

Quick Setup

WARNING: Before you begin any of the procedures in this section, read the safety
information that shipped with your computer. For additional safety best practices
information, see www.dell.com/regulatory_compliance.
WARNING: The AC adapter works with electrical outlets worldwide. However, power
connectors and power strips vary among countries. Using an incompatible cable or
improperly connecting the cable to the power strip or electrical outlet may cause fire
or equipment damage.
CAUTION: When you disconnect the AC adapter cable from the computer, grasp the
connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.
When you wrap the AC adapter cable, ensure that you follow the angle of the
connector on the AC adapter to avoid damaging the cable.
NOTE: Some devices may not be included if you did not order them.
NOTE: All ports and I/O connectors are sealed behind I/O locking doors. See section above on
I/O Door Operation.
1. Connect the AC adapter to the AC adapter connector on the computer and to the electrical
outlet.
™
Latitude™ XT2 XFR Setup and Features Information
Page 6