Chapter 3: Quick Setup - Dell Latitude 12 Rugged Extreme 7214 Getting Started Manual

Prerequisites
NOTE: Before you begin any of the procedures in this section, read the safety information that shipped with your
computer. For additional best practices information, see Dell.com/regulatory_compliance.
NOTE: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary
among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet
may cause fire or equipment damage.
CAUTION: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and
pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the
angle of the connector on the AC adapter to avoid damaging the cable.
NOTE: Some devices may not be included if you did not order them.
Steps
1. Connect the AC adapter to the AC adapter port on the computer and to the electrical outlet.
Figure 2. AC adapter
2. Connect the network cable (optional).
Figure 3. Network connector
3. Connect USB devices, such as a mouse or keyboard (optional).
Figure 4. USB connector
4. To turn on the computer, open the computer display and press the power button.
8 Quick setup
Quick setup
3