Rinse Holes Under The Agitator; If You Have Hard Water - Asko PROFESSIONAL WMC622PG Operating Instructions Manual

Table of Contents

Advertisement

Care and cleaning

Rinse holes under the agitator

If you suspect that objects such as nails or
paper clips may have fallen into the wash
drum, you should check the space under the
agitator. Such objects can rust and cause spots
on clothing. Nails and other sharp objects can
cause holes in fabrics.
Do as follows:
1. Insert a screwdriver or the like into the hole
on the agitator as illustrated and carefully pry
to the left.
2. Use your other hand to grasp the agitator and
pull it towards you.
3. Lift the agitator.
4. Remove any objects.
5. Place the agitator in the mounting hole with
the F-mark towards you. Ensure that all the
agitator fasteners are in their holes in the
drum. Push it in until it catches.
20

If you have hard water

If you live in an area with hard water (high
limescale content), a greyish-white coating may
form on the wash drum. To remove this coating,
pour approximately 20 gram of citric acid into
the wash drum and run any 90 °C programme.
Repeat if necessary.

Advertisement

Table of Contents
loading

Table of Contents