Settings; You Can Change The Following Settings; Language; Temperature - Asko PROFESSIONAL WMC622PG Operating Instructions Manual

Settings

You can change the following
settings:

• Language

• Temperature °C/°F

• Water intake

• Child-safe

• Hot water

Do as follows to open the settings menu:
1. Turn off the machine using the main power
switch.
2. Press and hold the Stop button and then
press the main power switch. Then press the
Stop button 5 times within 10 seconds.
3. Select the setting you want to change by
turning the programme selector.
4. Press the Stop button once.
5. Change and save the setting as described
below.
6. Press Start to return to the programme menu.
Language
1. Turn the programme selector to choose from:
US English, English, Svenska, Dansk, Norsk,
Suomi, Français, Deutsch, Italiano, Espanol,
Русский, Nederlands.
2. Press the Stop button once to save the
setting.

Temperature

1. Turn the programme selector to choose
between: °C and °F.
2. Press the Stop button once to save the
setting.
18
Water intake
(depending on the model)
Connecting to both the hot and cold water
supplies reduces the wash time and reduces
the washing machine's electricity consumption.
At the factory, the machine is set for connecting
to both hot and cold water supplies. Select Cold
if you want to set the machine for cold water
intake only.
• Turn the programme selector to choose
between: Cold and Hot.
• Press the Stop button once to save the
setting.
Child-safe
You can activate the Child-safe start option to
prevent children from starting the machine.
1. Turn the programme selector and select
"Child-safe On" or "Child-safe Off ".
2. Press the Stop button once to save the
setting.
You can temporarily deactivate Child-safe
start by pressing Start and the Door open
button at the same time. Child-safe start will be
deactivated for 3 minutes.
Hot water
(depending on the model)
However, if you choose to connect your
ECO-machine to only the cold water it is
important that you shut off the hot water
connection. Now select "Hot water Off ". If your
machine is connected to both hot and cold
water, you should select "Hot water On".
1. Turn the program selector. Select "Hot water
Off " for a cold water connection or "Hot water
On" if the machine is connected to both hot
and cold water.
2. Press the Stop button once to save the
setting.