Printing Surface - BCN3D Epsilon Series User Manual

Maintenance

Printing surface

Glass printing surface is a very delicate component of the printer, that can break or degrade if not treated properly.
Proper calibration and therefore good printing quality depends on the flatness and cleanliness of this surface.
This is a component that has to be maintained every time you start a printing process. The estimated lifespan of
this component is 500 printing hours, but it highly depends on the material used, the calibration and the type of
printing.
Activity
Clean the glass printing surface
with warm water and soap
Check correct strength of the
clamps
Perform printing surface calibra-
tion
Check the glass printing surface for
scratches
Frequency
Before each print
Before each print
Weekly or after transportation
Every 300 printing hours
Tools
Spatula
Cloth
-
-
-
User Manual 76