Status Display Panel; Figure 4-22. Status Display Panel Removal - Dell Inspiron 3200 Service Manual

4-36 Dell Inspiron 3000 Series Service Manual
S
tatus Display Panel
palmrest
assembly
(screw SD1 is 5 mm)
5 mm

Figure 4-22. Status Display Panel Removal

To remove the status display panel, follow these steps:
1. Remove the hinge covers and connector cover.
See "Keyboard" found earlier in this chapter.
2. Remove status display panel screw SD1.
3. Remove the status display panel.
The status display panel has two connectors.
4. Disconnect the status display panel connector from connector JP5 on the
main board.
5. Disconnect the I/R cable from connector P3 on the status display panel.
6. Remove the status display panel from the palmrest assembly.
When reinstalling the status display panel, see the first Caution for "Keyboard"
found earlier in this chapter.
SD1
connector JP5

status display panel

connector P3
status display panel
connector
I/R cable