13.3-Inch LCD Panel
(screws LC5–LC8
are 6 mm)
LCD panel
6 mm
LC5
(screw GS1
is 3 mm)
3 mm
back cover
LCD cable harness
NOTE: The inverter board is installed with the component side down, next to
the back cover.
Figure 4-46. 13.3-Inch LCD Panel Removal
To remove the 13.3-inch LCD panel, follow these steps:
1. Remove the front bezel.
See the previous subsection, "13.3-Inch LCD Front Bezel."
2. Remove LCD panel screws LC5, LC6, LC7, and LC8.
GS1
inverter cable
LC6
LC8
LCD-to-inverter
cable
connector CN2
LC7
Removing and Replacing Parts
4-65