Dell Inspiron 3200 Service Manual page 74

4-38 Dell Inspiron 3000 Series Service Manual
4. For a 12.1-inch display, remove cable connector screws G1 and G2. For a
13.3-inch display, remove only cable connector screw G1.
On 12.1-inch displays, screw G1 holds the LCD cable ground in place. G1
has a square washer. On 13.3-inch displays, screw G1 holds the left side of
the LVDS board (see Figure 4-32) in place.
5. For a 12.1-inch display, disconnect the LCD flex cable from connector JP8
on the main board. For a 13.3-inch display, disconnect the LCD cable har-
ness from connector JP1 on the LVDS board (see Figure 4-32).
6. Close the display and remove hinge screws H1, H2, H3, and H4.
7. Remove the LCD assembly from the computer.