System Reset - Victron energy Blue Smart IP67 Charger 12/7 Manual

vi. Bluetooth will now be re-enabled.

4.4 System reset

It is possible to perform a full system reset to restore all charger/battery related settings to
their default value; using the VictronConnect app.
Note that this does not reset any Bluetooth related settings, such as the PIN code or
pairing information.
To perform a system reset:
i. Access the 'device options' by selecting the 'settings' icon (gear) in the top right corner,
then the 'device options' icon (three vertical dots).
ii. Open the 'restore device' page by selecting 'Reset to defaults'.
iii. Select 'YES' to reset all settings to factory defaults.
19