Victron energy Blue Smart IP22 Charger 12/15 Manual page 14

vi.
Access the settings menu by selecting the 'setting' icon (gear) in the top right corner.
vii. Select Select the required 'charge preset', the 'maximum charge current' (standard or low) and if
desired enable 'night mode' directly from the settings list.
viii. The indicator LEDs on the Blue Smart Charger will be illuminated to confirm the active charge
mode and settings implemented.
4.3 Bluetooth
a) Changing the PIN code
To prevent an unauthorised Bluetooth connection, it is highly recommended to change the
default PIN code.
To change the Bluetooth PIN code:
i. Complete initial Bluetooth pairing and connection using the default PIN code (000000)
ii. Access the 'device options' by selecting the 'settings' icon (gear) in the top right corner, then the
'device options' icon (three vertical dots).
iii.
Open the 'Product info' page by selecting 'Product info'.
12