Jumper
Setting
BIOS
NICRST
PSWD
100
133
*
166
*
200
*
233
*
*
One set of the speed jumper pins must have a jumper plug installed; otherwise, the system will operate at an undetermined
speed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in your online System User's Guide.
jumpered
System Board and Riser Board Labels
Table 5-2 lists the labels for connectors and sockets on
your system board and riser board, and it gives a brief
description of their functions.
Table 5-1. System-Board Jumper Settings
Description
Reserved (do not change).
(default)
Reserved (do not change).
(default)
Password features are enabled.
(default)
Password features are disabled.
Reserved (do not use).
Jumpered when the microprocessor's internal speed is 133 MHz.
Jumpered when the microprocessor's internal speed is 166 MHz.
Jumpered when the microprocessor's internal speed is 200 MHz.
Jumpered when the microprocessor's internal speed is 233 MHz.
unjumpered
Working Inside Your Computer
5-7