Figure 6-15. System Battery And Battery Socket - Dell OptiPlex GXi Reference And Installation Manual

5. Install the new battery.
Orient the battery with the side labeled "+" facing up
(see Figure 6-15). Then insert the battery into the
socket, and snap it into place.
Figure 6-15. System Battery and Battery
Socket
6. Replace the expansion-card cage as described in
"Replacing the Expansion-Card Cage" in Chap-
ter 5.
6-12 Dell OptiPlex GX i Mini Tower Systems Reference and Installation Guide
battery
BATTERY
socket
7. Replace the computer cover; reconnect your com-
puter and peripherals to their power sources, and
turn them on.
8. Enter the System Setup program, and confirm
that the battery is operating properly.
See Chapter 2, "Using the System Setup Program,"
for information on running the System Setup
program.
Enter the correct time and date through the System
Setup program's Time and Date categories. Also, use
the copy you made in step 1 to restore the correct set-
tings for other system configuration information.
Then exit the System Setup program.
9. Turn off your computer, and unplug it for at least
ten minutes.
10. After ten minutes, plug in the computer, turn it
on, and enter the System Setup program. If the
time and date are still incorrect, see the chapter
titled "Getting Help" in your Diagnostics and
Troubleshooting Guide for instructions on obtain-
ing technical assistance.