C
ontrol Panel
Figure 5-5. Control Panel Removal
To remove the control panel, follow these steps:
1. Remove the hard-disk drive bracket.
2. Disconnect the control panel cable from the PANEL connector on the
system board (see Figure 5-13).
3. Unscrew the mounting screw securing the control panel to the chassis.
4. Slide the control panel out of the hooks securing it to the chassis.
Note the routing of the control panel cable as you remove it from the
chassis.
control panel
control panel
cable
Removing and Replacing Parts in the Midsize System
chassis hooks (2)
screw
5-7