Eject, Power, And Reset Buttons; Figure 4-2. Eject-, Power, And Reset-Button Removal - Dell OptiPlex Gs Service Manual

4-4 Dell OptiPlex Gs and Gs+ Systems Service Manual
E
ject, Power, and Reset Buttons
computer cover
(upside down)
reset button
power button

Figure 4-2. Eject-, Power, and Reset-Button Removal

To remove the eject, power, and reset buttons, follow these steps:
1. Lay the computer cover upside down on a flat work surface, with the
back of the cover facing you.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button and the reset button, use a small screw-
driver to push in the two or three plastic clips that secure the buttons to
the computer cover.
When these clips are released, the buttons come free from the cover.
eject button