4-20
Dell OptiPlex Gs and Gs+ Systems Service Manual
System Battery
battery
BATTERY socket
Figure 4-19. System Battery Removal
WARNING: There is a danger of the new battery exploding if it is in-
correctly installed. Replace the battery only with the same or equivalent
type recommended by the manufacturer. Discard used batteries accord-
ing to the manufacturer's instructions.
To remove the system battery, follow these steps:
1. If possible, enter the System Setup program, and make a printed copy
of the System Setup screens.
2. Remove the expansion-card cage.
3. Remove the battery.
Carefully pry the battery out of its socket with your fingers or with a blunt,
nonconducting object, such as a plastic screwdriver.
When you replace the system battery, orient the new battery with the "+" facing
up. Insert the battery into its socket and snap it into place. Then restore the
system configuration information using the printed copy.