Reattach the front-panel insert.
9
Reconnect the computer power cable to the electrical outlet.
10
Reattach the front door.
11
Reattaching the Front Door
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions on page 9.
Shut down the computer through the Start menu (see page 27).
1
Disconnect the computer power cable from the electrical outlet.
2
Lower the hinge arms to the vertical position.
3
Align the two clips on the inside of the front door with the two hinge arms.
4
Press inward on the front door until it clips to both hinge arms.
5
front-door
clips (2)
front-panel
door
hinge arms (2)
in vertical
position
Adding Pa rts
77