Reattaching The Front Door And Hinge Arms; Reattaching The Front Door - Dell Dimension 4300 Solution Manual

2H930bk1.book Page 62 Tuesday, November 20, 2001 5:02 PM
FILE LOCATION: C:\Projects\Green_Lantern_solutions\2H930c31.fm FILE LOCATION: FILE LOCATION: FILE LOCATION:
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 0 / 0 1
62 Ad d i n g Par ts
Reattaching the Front Door and Hinge
Arms
To prevent damage to your computer, the front door is designed to "break
away" if it is lifted up too far. If the front door breaks away, you might need
to reattach both the front door and the hinge arms.

Reattaching the Front Door

Shut down the computer (see page 20).
1
Lower the hinge arms to the vertical position.
2
Align the two clips on the inside of the front door with the two hinge
3
arms.
Press inward on the front door until it clips to both hinge arms.
4
front-door
clips (2)
front door
hinge arms (2)