Installa On Guide - Enso FE3500 Wireless Adjustable Base Owner's Manual

Installation Guide
Two people are required to set up the founda on.
NOTE: To avoid damage to the founda on, always open the
carton while the bed is in the at posi on.
1. Open the shipping box, cut the ribbon securing accessory
boxes & ma ress retainer bar, and put them aside.
Li the folded bed frame unit out of the shipping carton
carefully, and then put it on a at oor.
2. To install all six legs (seven for king/CK size,see image A on
page 10) , thread the bolt of the leg to the nut on the
founda on frame, and ghten by hand. DO NOT OVERTIGHTEN.
3. Uncoil the input power cord (connected to the control box's
power port) and plug it into the power supply.
4. Uncoil the power cord and connect it to the power supply.
9-23