Related Manuals for Enso PB475
Summary of Contents for Enso PB475
- Page 1 PB475 OWNER’S MANUAL Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual.
-
Page 2: Table Of Contents
table of contents Safety Precautions and Usage Statements ............... 1-3 Parts List . -
Page 3: Safety Precautions And Usage Statements
IN-HOME USE AND HOSPITAL STANDARDS: properly, or it has been dropped into water. Only use this bed base for Enso adjustable bed bases are designed solely for in-home use. This its intended use as described in this manual. Do not use accessories/ base was not designed as a hospital bed and is not designed to meet attachments that are not recommended by the manufacturer. - Page 4 TOLERANCE of the base creating a contact noise. When entering, exiting or shifting All Enso adjustable foundations, depending on make and model, are weight on the base, this contact noise may be audible as the wheels make designed and manufactured to perform and function within designated contact.
- Page 5 safety precautions and usage statements cycle. Attempting to circumvent or exceed this rating will shorten the BREAK IN PERIOD: life expectancy of the product and may void the warranty. The massage You can speed up the break-in period by simply spending time in the motors are not designed to operate continuously for more than 30 minutes adjustable bed through activities such as reading, watching TV or playing at a time.
-
Page 6: Parts List
parts list Before discarding the packing materials - ensure all the parts are accounted for. All electronics and components that need to be installed are located in boxes under the base or attached to the frame. Wired Remote Control (1) Mattress Retainer Bar (1)* Legs (6) †... -
Page 7: Base And Remote Overview
base and remote overview Head Motor Control Box Raise head and foot simultaneously. Lifts and Lowers Head Lifts and Lowers Feet One touch ZERO G® Preset Position preset position. Zero Button G® adjusts your legs to a higher level than One touch FLAT your heart helping to preset position. -
Page 8: Quick Reference Guide
quick reference guide Not to scale. For illustration purposes only. Read all instructions before beginning installation. ELECTRONICS OVERVIEW Head Motor Foot Motor Power Cord (D) Head Motor Foot Motor Powerdown Power LED Input Cord Port Port Box Port Light Connection Input Power Cord Control Box... -
Page 9: Installation Guide
installation guide STEP 1 STEP 3 With the help of an able-bodied assistant, place the carton on the To install the legs, unscrew the spacer on the four bed leg hole floor with the arrows pointing downwards. sites, thread the washer over the bolt of the leg with the recessed Remove the binding straps and packing materials, making sure not side facing the leg, and tighten by hand. - Page 10 installation guide STEP 4 STEP 7 Plug the power cord into a power source. Uncoil power connection cord from A surge protector is recommended. the head actuator and plug into Power Supply. STEP 5 STEP 8 Uncoil the Power Cord and connect to the Quickly test remote functions to verify proper setup before placing Power Supply.
-
Page 11: Connecting Strap
connecting strap (optional) If a split setup is being installed, optional plastic connecting straps can be used to help secure the bases together. To purchase optional accessories, please call 1-844-534-3676. STEP 1 STEP 2 With the bases in their desired location, slightly loosen both legs to Slide side (a) of the connecting strap onto leg bolt. -
Page 12: Syncing Two Bases
syncing two bases (optional) A Sync Cord is included with the base. Not available on Queen, Full or Full-Long size bases. The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases. STEP 1 Unplug bases from power source. -
Page 13: Headboard Brackets
headboard bracket installation guide (optional) Headboard Brackets are an optional accessory. To purchase optional accessories, please call 1-844-534-3676 A 9/16” (14 mm) & 1/2” (13 mm) socket and crescent wrench are necessary to complete installation. STEP 1 STEP 2 a.) Align the bracket and to the holes in the frame with the tabs Attach the plastic spacer and T-Bracket. -
Page 14: Troubleshooting
troubleshooting If one or more functions on the bed base have stopped operating: • Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base. •... -
Page 15: Español
EN-CASA USO Y NORMAS DE HOSPITAL: Por razones de seguridad y funcionamiento óptimos, somier enchufe en un protector Enso bases ajustables de la cama están diseñados exclusivamente para su uso en el contra sobretensiones (no incluido). La base de la cama sólo debe ser conectado hogar. - Page 16 Mantener en un mínimo de 30 Todas las bases ajustables Enso, dependiendo de la marca y el modelo, están cm (12 pulgadas) de distancia de las fuentes de calor directo. Para una limpieza más diseñados y fabricados para llevar a cabo y función dentro de los parámetros de...
- Page 17 español distribución desigual de peso puede hacer que la base para elevar de manera sujeto a las dos condiciones siguientes: 1) Este dispositivo no puede causar ninguna desigual. interferencia perjudicial y 2) Este dispositivo deberá aceptar cualquier interferencia • Llame a Servicio al Cliente para cualquier problema técnico. No trate de forzar la recibida, incluso si la interferencia causara un funcionamiento indeseado.
- Page 18 español No apriete en exceso Remoto: PASO 5: Desenrosque el cable de entrada (conectado al puerto de energía de la caja de control) y conéctelo a la fuente de energía. Levanta parte de la cabeza de la cama. PASO 6: Desenrosque el cable de electricidad y conéctelo a la fuente de energía. Sube la cabeza y el pie.
- Page 19 español puerto remoto con cable en la caja de control. Repita para el otro extremo del cable y • Plug base de la cama a una toma eléctrica diferente, o toma de corriente de la segunda caja de control. prueba con otro aparato de trabajo (se recomienda un protector de sobretensión PASO 3: Conecte remoto en Y-Cord.
-
Page 20: Français
MATÉRIAUX peut annuler la partie électrique de votre garantie. Des bases réglables Enso sont construits à partir de divers matériaux tels que le bois, Animaux et enfants: les métaux, les matières plastiques et des textiles. Tension, pression ou appliquée sur le Jeter immédiatement les matériaux d'emballage, car il peut poser un risque... - Page 21 Toutes les bases réglables Enso, en fonction de la marque et le modèle, sont conçus à l'ombre loin de la chaleur directe. Si les marques persistantes restent visibles après le et fabriqués pour exécuter et la fonction dans les paramètres désignés contrôle de la nettoyage, chercher l'aide professionnelle.
- Page 22 français Appuyez sur la tête ou au pied tout peut endommager le cadre et le tissu motores. N) Nuts (18) = Nuts (18) Cuidado: Pour prendre soin de la vie de votre tissu, tissu protège lumière directe du soleil autant que possible. Pour le nettoyage des taches, essuyez la surface avec une éponge * Ces composants sont attachés à...
- Page 23 français ÉTAPE 4: Une fois que la télécommande a été connecté au port télécommande filaire Ne serrez pas trop. ÉTAPE 4: avec le y-cordon, branchez bases dans la prise de courant et de tester toutes les fonc- Pour installer les jambes, enfiler la rondelle sur le boulon de la jambe avec le côté creux tions.
- Page 24 Nationwide Customer Service ©2016 Ergomotion Inc V001_07/2016 Phone 1.844.534.3676 1.805.979.9399 Email info@ergomotion.com www.ergomotion.com Serial Number:...
Need help?
Do you have a question about the PB475 and is the answer not in the manual?
Questions and answers
can you attach the adjustable base directly to a METAL headboard or only to the wall?
Yes, the Enso PB475 adjustable base can be attached to a headboard using optional headboard brackets. These brackets are installed by aligning them with the holes in the frame and securing them with bolts, nuts, washers, a plastic spacer, and a T-bracket. The installation requires a 9/16” (14 mm) and 1/2” (13 mm) socket and crescent wrench.
This answer is automatically generated
can I purchase replacement parts foe adjustable bed
Yes, you can purchase a replacement remote control for the Enso PB475 adjustable bed base, as indicated in the context. However, availability of other replacement parts is not mentioned.
This answer is automatically generated