Download Print this page
Bestop 52528 Installation Instructions

Bestop 52528 Installation Instructions

Header bikini for: jeep wrangler 2003 with or without door surround

Advertisement

Quick Links

DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE.
This product is only designed for the vehicles listed above. Failure to install this product on the proper
WARNING
This product is designed to enhance the appearance of the
vehicle. Do not rely in any way on the components of this
product to contain occupants or cargo within the vehicle, or
to protect against injury or death in the event of an accident.
Never operate vehicle in excess of manufacturer's specifi-
cations.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so could
place occupants or cargo of the vehicle in a potentially
dangerous situation. After installing or reinstalling, check to
make sure it has been properly installed.
52528 pg 1
Header Bikini
Installation Instructions
®
For: Jeep
Wrangler 2003
with or without Door Surround
vehicle could cause injury to the vehicle occupants and damage to the product.
Important Note: This product must be used with a TJ Header Windshield Channel, Number 51238-01
or in conjunction with your TJ Supertop Header, Number 51709-01.
Part Number: 52528
Installation Tips
Before you begin installing this product, read all instructions
thoroughly. Below are a few tips to make this installation
easier. After completing the installation, keep these instructions
for further reference.
For a smooth fit:
For ease in installation, the Bikini should be installed at
temperatures above 72° F. Below this temperature, the fabric
may contract an inch or more, making it difficult to fit to the
vehicle.
It is normal for the fabric to contract and wrinkle when stored in
the shipping carton. Within a few days after the installation, the
fabric will relax and the wrinkles will disappear.
Rev. B 0703

Advertisement

loading
Need help?

Need help?

Do you have a question about the 52528 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bestop 52528

  • Page 1 ® For: Jeep Wrangler 2003 Part Number: 52528 with or without Door Surround DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE. This product is only designed for the vehicles listed above. Failure to install this product on the proper vehicle could cause injury to the vehicle occupants and damage to the product.
  • Page 2: Parts List

    Make sure space between top fabric and Driver's Side windshield flange is equal on both sides View from front Note: For best possible installation, check to make sure that the bikini top is perfectly centered on the vehicle. Rev. B 0703 52528 pg 2...
  • Page 3 When the alignment of the D-Ring Web Strap is established, use the #30 Torx to tighten the Buckle bolt. Tighten the web strap at the buckle. Strap Thread the strap through the D-Ring from the bottom Threading Strap through Buckle Rev. B 0703 52528 pg 3...
  • Page 4 Hook and Loop to each other. Note: When removing the Bikini, it will be easiest to remove the plastic strips by starting at the front of the plastic and pulling down and out. Rev. B 0703 52528 pg 4...
  • Page 5 This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For further information, please contact: Bestop Inc. Customer Service (800) 845-3567 (303) 465-1755 Rev. B 0703 52528 pg 5...