Startup / Operation - BOMANN KG 7301 Instruction Manual

Startup / Operation

Startup / Operation
Startup / Operation Startup / Operation
Prior to first use Prior to first use
Prior to first use Prior to first use
CAUTION: CAUTION:
CAUTION: CAUTION:
After transport, the appliance should be
left standing upright for four hours before
connecting to the power supply. Nonob-
servance could lead to malfunction of the
cooling system and causes an appliance
breakdown.
Clean the appliance interior including all
accessory parts. Consider the instruc-
tions which we provide in the chapter
"Cleaning and Maintenance".
Starting the appliance Starting the appliance
Starting the appliance Starting the appliance
• Connect the appliance to the power
supply.
• Operate the temperature control. See
also the section "Settings".
Settings Settings
Settings Settings
Setting [ 0 ] means that the appliance is
in the off state. Turn the temperature
control clockwise, starting from this set-
ting; the appliance will turn on automati-
cally.
The power levels [ 1–7 ] regulate the
different values of the internal tempera-
ture.
Setting 0: Off state Setting 0: Setting 0: Setting 0:
Setting 1: Lowest setting (warmest inside Setting 1: Setting 1: Setting 1:
temperature)
Setting 7: Highest setting (coldest inside Setting 7: Setting 7: Setting 7:
temperature)
Note that the temperature will change
depending on the ambient temperature,
frequency of door opening and the
amount of food in the appliance.
During initial operation, turn the tempera-
ture control to the highest setting first,
until the appliance has reached the de-
sired operating temperature. Afterwards it
is recommended to turn the control back
to a medium setting; correcting the tem-
perature at a later point would then be
easier.
Interior light Interior light Interior light Interior light
When opening the fridge door, the interior
light will turn on automatically.
Storing food Storing food Storing food Storing food
NOTE: Recommendation! NOTE: Recommendation!
NOTE: NOTE: Recommendation! Recommendation!
To guarantee that the temperature is low
enough, you should pre-cool the appli-
ance a few times before initial loading
foods.
29