BOMANN KG 7301 Instruction Manual page 28

• (1) Remove the cover caps and loosen
the screws underneath.
• (2) Remove the appliance cover; loosen
the blind cover (a) and insert the blind
cover (b)*.
• (3) Disassemble the upper door hinge;
lift out the upper unit door.
• (4) + (5) Move the blind cover, after
changing the positions of the blind plug
and the hinge pin holder on the top of
the door.
• (6) Release the doorstop (c) and fasten
the doorstop (d)* on the underside of
the door. Set the door safely aside.
• (7) Disassemble the middle door hinge;
lift out the lower unit door.
• (8) Change the positions of the blind
plug and the hinge pin holder on the top
of the door.
• (9) Move the doorstop on the underside
of the door. Set the door safely aside.
• (10) Move the blind cap and plugs on
the exposed holes of the middle door
hinge.
• (11) Tilt the unit slightly backwards and
lock it in this position. Unscrew the feet
and disassemble the lower door hinge.
• (12) + (13) Transfer and fasten the
lower door hinge to the opposite side;
after moving the pin to limit the door
opening into the exposed hole. Screw
in the feet.
• Put the appliance back in the upright
position. Put on the lower door and fix it
in its intended position.
• (14) Turn the middle door hinge about
180°, transfer and fasten it to the oppo-
site appliance side.
• Put on the upper appliance door and fix
in its intended position.
• (15) + (16) Transfer and fasten the
upper door hinge to the opposite side
after unscrewing the hinge pin and re-
placing it from the other hinge side.
• (17) Replace the appliance cover, fas-
ten it and put on the cover caps.
Check that the doors are aligned vertical-
ly and horizontally to ensure proper open-
ing and closing of the doors.
28