BOMANN KG 7301 Instruction Manual page 27

• Avoid the installation: Avoid the installation:
Avoid the installation: Avoid the installation:
- near heaters, next to a stove, direct
sunlight or any other heat sources;
- at locations with high humidity (e.g.
outdoors, bathroom), as metal parts
would be susceptible to corrosion un-
der such circumstances;
- near volatile or flammable materials
(e.g. gas, fuel, alcohol, paint, etc.), in
rooms which may have poor air circu-
lation (e.g. garages).
- Do not expose the appliance any
weather.
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING: WARNING: WARNING: WARNING:
• The installation to the mains supply
must conform to the local standards
and regulations.
• Improper connection may cause to an
electric shock electric shock electric shock electric shock!
• Do not modify the appliance plug. If the
plug does not fit properly to the outlet,
let install a proper outlet by an author-
ized specialist.
• The accessibility of the power plug
must be ensured to disconnect the ap-
pliance from the power supply in case
of emergency.
• Make sure that the voltage supply
matches the specifications on the rating
label before connecting.
• Connect the mains cable to a properly
installed and earthed wall outlet.
• If the plug after installation is not ac-
cessible, a corresponding disconnect
device must be available to meet the
relevant safety regulations.
Reverse the door opening Reverse the door opening Reverse the door opening Reverse the door opening
If required, the door openings can be
moved from the right (supplied condition)
to the left side.
WARNING: WARNING:
WARNING: WARNING:
When replacing the door stops, the appli-
ance must be disconnected from the
power supply first.
NOTE: : : : NOTE NOTE NOTE
• Ask another person to assist.
You possibly need:
•
Phillips screwdriver as well as a thin-
blade screwdriver.
* * * * Delivery scope!
•
Keep the parts to be replaced for an-
other possible door stop change.
27
screw wrench,