Way Conference Calls - BT Converse 2-line Telephone User Manual

3-Way Conference Calls

You can hold a conference call with two
other callers on separate lines.
3-Way Conference Calls will not work on
the loudspeaker.
To make a 3-Way Conference
Call
Press buttons in order shown
Make your first call on Line 1.
When connected, press and release
the
HOLD
Line 1 is put on hold.
Press the
the number you want.
When the second caller answers
press the
now speak to both callers at the
same time.
To speak privately to one line only
Press and release the
button. Both callers are put on
hold.
Press the
talk to the call on that line.
Press the
your conference call.
12
button. The caller on
button and dial
Line 2
button. You can
CONF
HOLD
or button to
Line 1 2
button to resume
CONF
To end one call only
Press and release the
button. Both callers are put on
hold.
Press the
Line 1
the call on Line 1 or the
button if you want end the call on
Line 2 .
Say goodbye to that caller.
Press the
Line
you want to continue. The other
line is disconnected and you can
talk to your remaining caller.
PLEASE NOTE
It is possible that you may notice a loss of
sound quality on Conference calls, due to
your Converse 2-Line regulating the
audible variations of 3-way calls.
Should this reach unacceptable levels, BT's
3-Way Calling Select Service can provide
an alternative method without sound
problems. You need to subscribe to this and
it is a chargeable service.
HOLD
if you want to end
Line 2
button of the call