Using Your Converse 2-Line - BT Converse 2-line Telephone User Manual

Using your Converse 2-Line

To make a call on Line 1
Press buttons in order shown
Lift the handset and listen for the
dial tone. The Line 1 red light
comes on.
Dial the number you require.
To end the call, replace the
handset.
To make a call on Line 2
Press and hold down the
button and lift the handset.
The Line 2 red light comes on.
Release the Line 2 button.
Dial the number you require and
listen for the dialling tone.
To end the call, replace the
handset.
To receive a call on Line 1
The phone rings and the red Line
1 Ringer light flashes.
Lift the handset and speak.
To end the call, replace the
handset.
8
To receive a call on Line 2
To put a call on hold
Line 2
The phone rings and the red
Line 2 Ringer light flashes.
Press and hold down the
button and lift the handset.
Release the Line 2 button and
speak.
To end the call, replace the
handset.
When a call is placed on hold,
you cannot hear your caller and
they cannot hear you.
During a call:
Press and release the
button.
The IN USE light changes from red
to green and the call is on hold.
To take the call off hold, press
the or button (depending
Line 1 2
on which line you are using. The
green light changes back to red
and you can talk to your caller.)
Line 2
HOLD