Unfolding The Handle; Filling The Engine With Oil - Lawn-Boy Insight 10684 Operator's Manual

Setup
Note: Remove and discard the protective plastic
sheet that covers the engine.

Unfolding the Handle

1. Move the handle rearward and hold the upper
handle in place.
2. Tighten the upper
handle knob.
3. Tighten the lower
handle knobs as tight as
you can.
5
m-7918
m-7919
m-7920
3352-935 Rev B

Filling the Engine with Oil

Your mower does not come with oil in the engine,
but it does come with a bottle of oil.
1. Remove the dipstick.
m-7921
2. Slowly pour oil into the oil fill tube until the oil
level reaches the Full line on the dipstick. Do not
overfill. (Max. fill: 20 oz., type: SAE 30W detergent
oil with an API service classification of SF, SG, SH,
SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
2 operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil on page 13.
m-7921/m-5571