8. CLEANING AND MAINTENANCE Basic information ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������15 Open the combustion chamber door �����������������������������������������������������������������������������������������������������������������������������������������������������������������15 Cleaning of the burn pot - daily �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������15 Ampty the ash drawer �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������15 Cleaning flue pipes ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 16 Cleaning the flame temperature sensor ����������������������������������������������������������������������������������������������������������������������������������������������������������17 Combustion air - intake ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Cleaning the pellet container �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Cleaning the door glass ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Bearings �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17...
N108572 Allen screw M06x30 from serial number Round sealing strip black N112490 Levelling screw black N100485 1321134 Kapo black till serial Front panel silver (till 31 *1 Z35272 Baffle plate 2 LB00561 number 1358539, Kapo serial number 1361179) 31 *2 Z36342...
Dimensions Technical Data Technical Data Heating power range [kW] 2,5 - 8 Room heating capacity (depending on 50 - 220 house insulation) Fuel consumption [kg/h] till 1,9 Pellet container capacity* [l/kg] 42/~28 Electric supply [V]/[Hz] 230/50 Average electrical input ~ 20 Fuse 2,5 AT Efficiency...
The hardening of the paint is finished after the first as well as the regulations and rules applicable locally� heating with high power� RIKA stoves should only be installed in rooms with normal humidity (dry areas according to VDE 0100 Part 200)� The furnaces are not Safety distances splash water protected and may not be installed in wet areas�...
Stoves type 1 (BA 1): Prior to set up Suitable for multiple occupancy� (Note the different country Floor bearing capacity regulations�) Ensure that the substructure is capable of bearing the weight of the These may only be operated with the combustion chamber door stove prior to set-up�...
3. BRIEF INFORMATION ON FUEL - PELLETS Your pellet stove is only approved for the burning of pellets of tested What are pellets? quality� Please ask your pellet stove dealer for tested fuel and a list of monitored fuel manufacturers� Wood pellets are a standardised fuel�...
4. TECHNOLOGY AND SAFETY FUNCTIONS The technological advances in your new combi stove are the result of Automatic cleaning cycle years of testing and practical experience� The practical advantages of your pellet stove are convincing: The speed of the flue gas fan is increased every hour for a short period to blow ash from the burn pot, increasing the operational safety�...
(not included!)� At pellet stoves with longer intake pipes than 1 m the diameter should be increased to 100 mm� (see We recommend original flue pipes from RIKA for proper connection� RIKA range)� Connection to the chimney To ensure sufficient air intake, the intake pipe should not exceed max�...
6. ASSEMBLY/DISMANTLING STONE AND OPTIONS The side metal casing is secured with 2 hex screws� Remove these and lift the side panels up and away� Note Only work on the unit when the mains plug has been disconnected and the stove has cooled completely� Note During assembly / dismantling do not allow objects (screws etc�) to fall into the pellet container –...
RIKA Firenet module and Amazon Alexa RIKA VOICE allows you to control your RIKA stove by simply speaking to it� Power on or off, switching between modes or adjusting the preferred heat output or room temperature: a few words is all it takes! More detailed information could be obtained at www.rika.at or from...
Note We recommend at least once a year to have all maintenance carried out by your RIKA dealer� Do not damage the ignition when cleaning with a wire brush� Vacuum out the pipe of the ignition�...
Cleaning flue pipes Now clean the flues with the included wire brush� Suck the combustion residues out of the deflection region� The flue pipes should be cleaned at least 2 x a year or after approx� 700 kg pellets� The flues are behind the combustion chamber� Loosen the 4 Allen screws and slide the confection fins to the right�...
Cleaning the flame temperature sensor Cleaning the door glass Remove the dust deposits from the sensor at regular intervals� Use a If necessary clean cleaning cloth or newspaper� The viewing window becomes coated in the case of solid fuels, particularly with the very fine ash of wood pellets, light or dark depending on the pellet quality (especially with low output)�...
9. PROBLEMS - POSSIBLE SOLUTIONS Problem 1 Problem 3 Fire burns with weak, orange flame� Pellets heap up in fire trough, Flue gas discharge when wood is added and during heating phase� window soots up� Cause(s) Cause(s) Leaking cleaning openings Insufficient combustion air Chimney draught too low Poor chimney draught...
Note Please return 1 completed protocol for putting into service to Warranty terms RIKA Innovative Ofentechnik GmbH, Müllerviertel 20, 4563 Difference between warranty (statutory) and guarantee (voluntary), Micheldorf, Austria� terms of guarantee, determination of wearing parts, reference to pellet quality to be used and the consequences of poor quality�...
Page 20
The client confirms the reception of correct and clear instructions. Our general terms and conditions shall apply. I consent to the collection, saving and use of my personal data (name, address, e-mail) by RIKA Innovative Ofentechnik GmbH for marketing and information purposes.
REMAIN UNAFFECTED BY THE GUARANTEE! the time of registration. 12. WARRANTY CONDITIONS See the respective general terms and conditions of business and warranty conditions of the RIKA dealer. The warranty does not cover: Wearing parts (normal wear and tear not resulting from a defect) Parts in contact with fire, e.g.
Page 22
Electronic Waste RIKA Innovative Ofentechnik GmbH is ensuring that its products are eco-friendly throughout the product life cycle� This is why our commitment for electronic products goes beyond the end of their product life cycle� In accordance with the European Directive (2012/19/EU) Waste Electrical and Electronic Equipment (WEEE) and other local regulations, RIKA supports the setup of take-back systems and recycling infrastructures�...
Need help?
Do you have a question about the KAPO and is the answer not in the manual?
Questions and answers