Replacing A Front Turn Signal Light Bulb - Yamaha Nouvo AT115S Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
ZAUU0336
1. Headlight bulb holder
5. Place a new bulb into position, and
then secure it with the bulb holder.
6. Install the cowling.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
7
Replacing a front turn signal
light bulb
NOTICE
_
It is advisable to have a Yamaha
dealer perform this job.
_
1. Place the scooter on the center-
stand.
2. Remove cowling A. (See page 7-6.)
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
ZAUU0337
1. Front turn signal light bulb socket
4. Remove the burnt out bulb by
pushing it in and turning it counter-
clockwise.
7-30
EAUT1261 5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
ECA10670
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the cowling.