Aan/Uit-Knopeenheid Met Vingerafdruklezer; Removing The Power Button Assembly With Fingerprint Reader - Dell Precision 7750 Service Manual

Steps
1. Place the power button into its slot on the computer.
2. Replace the two (M2x3) screws to secure the power button in place.
Next steps
1. Install the power button
2. Install the heat-sink assembly.
3. Install the battery.
4. Install the base cover.
5. Install the SD card.
6. Follow the procedure in

Aan/uit-knopeenheid met vingerafdruklezer

Removing the power button assembly with fingerprint
reader
Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the heat-sink assembly.
6. Remove the power button board assembly with fingerprint
About this task
The figure indicates the location of the power button and provides a visual representation of the removal procedure.
Steps
1. Remove the two (M2x3) screws that secure the power button assembly with fingerprint reader in its slot on the computer.
2. Remove the power button assembly with fingerprint reader from the computer.
board.
after working inside your computer.
before working inside your computer.
reader.
Demonteren en hermonteren 59