NOT unplug the power cord. DO NOT throw water on it. DO NOT try to smother the fire. Clean and maintain your grill after each use. We suggest that you use Z GRILLS BBQ WOOD PELLETS, which are specifically made to work in our grills. DO NOT use your grill on rainy days.
ASSEMBLY INSTRUCTIONS PARTS DIAGRAM Hopper Burner Assembly:...
Page 8
Body Frame Assembly: 1.ASSEMBLING OF BOTTOM BASE 1.Turn the Platform (42) upside down. Install the wheels (without brake)(47) in the screw holes. Tighten with wrench. Note: The 2 wheels (without brake)(47) should be installed on the side near the magnet base. And the 2 wheel (with brake)(46) should be installed on the other side.
Page 9
2.MOUNTING THE BODY FRAME 1.Secure Left Plate (34) on the Platform (42) with Bolt (A). 2.Secure Right Plate (45) on the Platform (42) with Bolt (A). 3.Secure Back Plate (41) on the Platform (42) with Bolt (A) and link with Left Plate (34) and Right Plate (45).
Page 10
4.ATTACHING THE SMOKE STACK AND CHIMNEY CAP 1.Align the holes in the Smoke Stack (15) with holes in the Smoke Stack Gasket (14), which fits between the right end of the Grill and the Smoke Stack Gasket (14). Insert the Hexagon Bolts (B) through the holes in the Smoke Stack (15) and the Smoke Stack Gasket (14).
Page 11
5.POSITIONING THE DOOR 1.Align the holes in the Left Door (36) with the holes in the Handle (43). Place a Gasket (E) on each Hexagon Bolt (B) and tighten with Wrench. Repeat the former step to assemble the Right Door (44). 2.Take the Left Door (36) with handle assembled.
Page 12
7.ATTACHING THE CHAMBER DOOR HANDLE Penetrate Hexagon Bolt (B) through Gasket (E) and Lid directly into the Lid Handle (2) and tighten. Do not screw too tightly. 8.POSITIONING THE HEAT BAFFLE Position The Heat Baffle (4) on the locating brackets which are on the inside walls of the Grill.
Page 13
9.POSITIONING THE GREASE DRAIN PAN Position The Grease Drain Pan (6) over the Firepot. The notched legs of the Grease Drain Pan should be facing downward to fit onto the locating brackets so that the grease can flow into the Grease Drain Tube. 10.POSITIONING THE PORCELAIN GRILL AND WARMING RACK Position the Porcelain Grill (7) inside the cooking area and locate the Warming Rack (6)(5) on the rack support inside the chamber.
Page 14
11.POSITIONING THE ASH TRAY 1.Install the Ash Tray Handle (13) on the Ash Tray (12) with Screws (A) and Nuts (G). 2.Insert the Ash Tray (12) into the Grill Chamber (1). 12.HANG ON THE GREASE BASKET Locate the Grease Drain Tube which is on the right side of the chamber, then hang the Grease Bucket (10) on the hook.
Please read this manual carefully and follow it step by step before starting your Z Grills for the first time and each time the grill runs out of pellets. 1.Remove the Porcelain Grills, Grease Drain Pan and Heat Baffle from the interior of the grill.
Temperature Dial to any cooking setting desired. 5.If this step is not successful, see TROUBLESHOOTING or contact Z GRILLS Technical Support to help diagnose the problem.
OPERATING TIPS 1.like all grills, the actual temperature of this grill and the cooking times will be affected by external temperature, humidity, wind conditions, quality of pellets, etc. 2.It is beneficial to shelter your grill from the wind. This will aid in temperature output, heat retention and heat recovery time when the lid is open.
2.It is highly recommended that you use Z GRILLS Cover to protect your grill . 3.You can use a high-quality car wax on the outside surfaces of your grill to protect it’s finish.
Page 19
Clean the ash from the interior of the grill periodically. If excessive ash is in the firepot, it may cause the fire to go out. This is especially true in the SMOKE setting. A shop vac is an excellent tool to use for removing the ash. WARNING: MAKE SURE THE GRILL FIRE IS OUT, THE UNIT IS OFF, UNPLUGGED AND COLD BEFORE ATTEMPTING TO CLEAN ASH FROM THE GRILL.
TROUBLESHOOTING CAUTION: Make sure the grill is completely cool and unplugged before you do any inspection, cleaning, maintenance or service work. Potential Problem Solution Cause Make sure the power cord is plugged Power in. Verify there is power at the electrical outlet.
Page 21
Pellets pellets. When contacting customer support Contact please have the following information Z GRILLS available: Your authorized Z Grills Customer dealer, your name, phone number, Get your new parts Service or your address, your Z Grill serial number and Z GRILLS part identification number.
Thank you for purchasing a Z GRILL! If you have any question, please contact customer support or your Z GRILL dealer. Z GRILLS, INC. offers the best technical and sales support in the industry. When calling customer please be prepared to provide the following information: 1.Dealer's name and date of purchase...
Z GRILLS 3 YEAR LIMITED WARRANTY Z GRILLS, Inc. provides a 3 years warranty from the date of purchase by the original owner. This warranty applies to defects in all materials and workmanship. During the warranty period, Z GRILLS, Inc. will at its option repair or replace defective parts or units.