Advertisement
Set...
Installing the oven accessories
1. Insert side racks
There is a left hand and right hand version
(see image to the right).
1. Insert the rear peg into the rear access
hole, ensuring that the peg is fully
inserted.
2. Then locate the front peg into the front
access hole and push in firmly.
2. To fit a shelf or tray to side racks:
The shelves are designed so that they have
maximum extension but cannot be accidentally
pulled right out.
To fit a shelf to side racks:
1.
Locate the rear edge of the shelf in between
guide rails of the side rack – see diagram.
2. Ensure the same rail positions on both sides of
the oven are being engaged. With the front edge
raised, begin to slide the shelf into the oven.
3. Once the detents have passed the front edge of
the side rack, the shelf can be pushed completely
in. When fully inserted the shelf should not
interfere with the closed oven door.
Set the time
You must set the time before you can operate
your appliance.
1.
After the appliance has been electrically
connected, '12:00' will be displayed and the
clock icon will flash.
2. Press + or – symbols to set the time of day.
3. 5 seconds after the last change, the clock icon
will disappear, confirming the time has been
adjusted.
NOTE: The clock has a 24 hour display.
Left hand side rack
front peg
rear peg
Detent
Condition the oven
(to burn off any residue)
New appliances can have oil or residue left from
manufacturing. You will need to heat your oven
for 2 hours before using it for the first time.
1.
Turn the function selector dial to FAN
FORCED.
2. Using the temperature selector, set the oven
to 180°C and heat for approximately 2 hours.
Please ensure that the room is well ventilated
during this process.
Advertisement
