Advertisement
2.5 Programming Box
When using the Ezairo 7160 SL Hybrid Demonstrator Board, a programming box interface is provided through a
6-pin DIN connector that is mounted on the board. A 6-pin DIN to 6-pin DIN cable is also provided, allowing direct
connection to the programming box. This connector is compatible with the connections provided on most of the
programming boxes listed in Table 2, with the exception of the Promira. When using the Promira, use the 6-pin DIN to
34-pin header adapter, provided with the Ezairo 7160 SL Hybrid Demonstrator Board.
Communicating with a device requires an I
interface is provided by one of a number of different programming boxes that are compatible with Sound Designer
Software. Supported devices are listed in Table 2.
Table 2. Supported Communication Interfaces and Protocols
Interface
Communication Accelerator Adaptor (CAA)
HiPro
DSP3
Promira Serial Platform
NOAHlink
NOAHlink Wireless
Sound Designer Software works with any of the programming boxes listed above, but before using a wireless
programmer or any other wireless feature, Ezairo 7160 SL must first be configured for wireless operation using a wired
programming box. In addition, you must ensure that the Windows drivers provided by the manufacturer have been
installed prior to using Sound Designer Software. Windows drivers for the various programming boxes are available
from the manufacturers listed below in Table 3.
Table 3. Windows Programmer Drivers and Their Manufacturers
Inferface
HiPro2
Noahlink/Noahlink Wireless
Promira
CAA
DSP3
3. I
S
NITIAL
ETUP
This section describes the initial setup for evaluating the Ezairo 7160 SL Pre Suite. This includes downloading and
installing the Sound Designer Software Windows application, configuring the Ezairo 7160 SL Hybrid Demonstrator
Board, and connecting the programming box. The description is intended for first-time users. If you have already
completed the initial setup, you can proceed to Section 4.2.1, "Audio Path Configuration" on page 18.
3.1 Prerequisites and Software Downloads
Before attempting to install Sound Designer Software, ensure that the computer meets the following minimum
requirements:
ON Semiconductor Confidential
2
C connection between the Windows PC and Ezairo 7160 SL. The I
2
Wireless
I
C
X
X
X
X
X
X
Manufacturers of Drivers
Otometrics
HIMSA
TotalPhase Inc.
ON Semiconductor
ON Semiconductor
www.onsemi.com
7
ON Semiconductor
2
C
Advertisement
