Advertisement
Ezairo® 7160 SL Pre Suite Getting Started Guide
Figure 10. Detecting the Device
NOTE: Selecting NOAHlink Wireless displays a Scan button and a text field. The text field accepts the
name of a device. Alternatively, using the Scan button opens a window that would allow the
NOAHlink Wireless to scan for available devices so that you can choose one.
7.
Use the back button—the arrow in the top left corner—to return to the Control Panel.
8.
To connect to the device, click Programmer > Connect. You might get a popup warning you that the device is
configured with another library. If you see this pop-up, click OK.
9.
Before communicating any parameter information, Sound Designer Software checks the device to determine
the firmware version currently residing in NVM. If the current version (contained within Sound Designer
Software) is not the same as that currently in the device, you are prompted to upgrade the firmware. The
prompt screen looks similar to that shown in Figure 11 on page 17.
ON Semiconductor Confidential
www.onsemi.com
16
Advertisement
