Download Print this page

ON Semiconductor Ezairo 7160 SL Getting Started Manual page 10

Pre suite
Hide thumbs Also See for Ezairo 7160 SL:

Advertisement

Ezairo® 7160 SL Pre Suite Getting Started Guide
Table 5. App Development Tools in the Sound Designer SDK
Tool
iOS Sound Designer Software
Frameworks
Android Sound Designer Software
Libraries
More details on the Sound Designer SDK and its features can be found in the SDK Readme.html file, located at the
top level of the main .ZIP file.
3.3 Configuring the Hybrid Demonstrator Board
The description below assumes use of the socketed version of the Ezairo 7160 SL Hybrid Demonstrator Board
(E7160SL-001GEVB) can be used for rapid evaluation of the Ezairo 7160 SL Pre Suite. The non-socketed version
(E7160SL-002GEVB) can also be used.
Before connecting the Ezairo 7160 SL Hybrid Demonstrator Board to the programming box, ensure that a
functioning Ezairo 7160 SL hybrid is installed. Refer to the Ezairo 7160 SL Hybrid Demo Board User's Manual
(EVBUM2581) for detailed instructions on how to install the hybrid. Once the hybrid is installed, ensure that the
jumpers and power switch are configured as listed in Table 6. If you are planning to work on wireless features, you also
need to ensure that an appropriate antenna is connected to the threaded connector J1. Full information on the jumper
settings and other board options can be found in the Ezairo 7160 SL Hybrid Demo Board User's Manual
(EVBUM2581).
Table 6. Jumper Configurations for Ezairo 7160 SL Hybrid Demonstrator Board
Jumper/Switch
Required Setting
PSU-SEL
Short pins 1&2
VBAT-I
Short pins together
RCVR-EN
Short pins 1&2
RCVR-BAT
Leave open
ON-OFF
Set to ON
A properly configured Hybrid Demonstrator Board looks like the one shown in Figure 5. The correct settings are
indicated by red rectangles.
ON Semiconductor Confidential
Description
Location
XCode app
samples/ios/sdmobile
Xamarin app
samples/ios/xamarin/
Framework
Android software
samples/android
libraries and a
demonstration app
Description
Draws power from 6-pin DIN connector
Not measuring current
Enable 7160SL output drivers
Using onboard power
Power switch for E7160
www.onsemi.com
10
More Information
samples/ios/sdmobile/sdmobile/README.TXT
samples/ios/xamarin/README.TXT
samples/android/E7150SL_SDK_Demo/
README.TXT

Advertisement

loading