Advertisement
Figure 11. Upgrading the Firmware
NOTE: Firmware cannot be updated over the wireless interface. When using a wireless programmer, you
are notified of the firmware version but you will not be able to update the device. This requires a
wired programmer.
10. Once the connection succeeds, the connection status symbol appears to the right of the file name, as shown
below in Figure 12 on page 18. You can hover over this symbol to view the programmer name and the
firmware ID of the device. It is now possible to configure the device parameters.
ON Semiconductor Confidential
www.onsemi.com
17
ON Semiconductor
Advertisement
