Advertisement
Ezairo® 7160 SL Pre Suite Getting Started Guide
Figure 6. Connected Ezairo 7160 SL Hybrid Demonstrator Board, Windows PC, and Programming Box
Once the system is connected, you can perform the initial communication from the PC to Ezairo 7160 SL (device
connection).
4. W
S
ORKING WITH THE
OUND
4.1 Connect to Device
NOTE: The Ezairo Pre Suite firmware bundles are embedded within the Sound Designer Software.
Options for selecting the appropriate firmware are provided upon initial connection to a device.
To establish a connection with the device, follow these steps:
1.
Power on your device by plugging in the programming box and moving the Hybrid Demonstrator Board
ON-OFF switch to the ON position (if not already done).
2.
Start Sound Designer Software by clicking on the Sound Designer link under the ON Semiconductor tab on
the Windows Start menu.
3.
When the Select a Workspace dialog box appears, you need to choose a workspace to for Sound Designer
Software. For new installations, we highly recommend selecting an empty directory for the workspace. Errors
might occur if opening a workspace created using an earlier version of the Sound Designer Software
Application. To create a workspace, click Browse and the software allows you to create one. If you click
Browse and select a pre-existing directory for your workspace, make sure it is empty. To begin working with
ON Semiconductor Confidential
D
SDK
ESIGNER
www.onsemi.com
12
Advertisement
