Cleaning The Drain Pump - Miele G 5050 Operating Instructions Manual

Cleaning the drain pump

If water remains in the wash cabinet
after the end of a programme, the water
has not been pumped away. The drain
pump may be blocked by foreign ob-
jects. These are easy to remove.
 Disconnect the dishwasher from the
mains.
To do this, turn off the dishwasher,
switch off at the socket and withdraw
the plug.
 Take the filter combination out of the
wash cabinet (see "Cleaning and
care" chapter, "Cleaning the filters").
 Scoop the water out of the cabinet
using a suitable small container or
utensil.
Cleaning and care
 Press the catch of the drain pump
cover inwards .
 Tip the cover inwards until it is re-
leased .
 Rinse the cover thoroughly under run-
ning water and remove all foreign ob-
jects.
67