Checking The Filters In The Wash Cabinet; Cleaning The Filters - Miele G 5050 Operating Instructions Manual

Cleaning and care
Checking the filters in the
wash cabinet
The filter combination in the base of the
wash cabinet retains coarse soiling
from the suds solution. This prevents
soiling getting into the circulation sys-
tem and re-entering the wash cabinet
through the spray arms.

Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
The filters can become blocked by soil-
ing that collects over time. The level of
soiling and time it takes before the fil-
ters need cleaning will vary depending
on use.
 Monitor the condition of the filter
combination regularly and clean it if
necessary.
64

Cleaning the filters

 Switch the dishwasher off.
 Remove the lower spray arm (see
"Cleaning and care" chapter, "Clean-
ing the spray arms" section).
 Before removing the filter combina-
tion, remove any coarse soiling to
prevent it from entering the circulation
system.
 Remove the filter combination.