Adding Detergent And Care Product; Starting The Programme; Adding Laundry; Cancelling The Programme - Siemens WM14UPH1ES User Manual And Installation Instructions

Separate the laundry and place it
3.
in the drum.
Note: Ensure that there is no laun-
4.
dry trapped in the door.
Close the door.
Adding detergent and care
product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent to the manual
dosing compartment.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Tip: In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Requirement: Find out the optimum
dosage for detergent and care
product. → Page 36
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 20
If required, add the care product.
3.
Push in the detergent drawer.
4.

Starting the programme

Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press .
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.

Adding laundry

Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Press .
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→ "Display", Page 21
Add or remove laundry.
2.
Close the door.
3.
Press .
4.

Cancelling the programme

Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Press .
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the programme.
– If the water level is high: Start
the or
Remove the laundry.
3.
Basic operation en
programme.
39