Table of Contents
Advertisement
Fault
flashes.
flashes.
lights up.
flashes.
All other error codes.
Malfunctions
Fault
The appliance is not work-
ing.
The programme does not
start.
Cause
The automatic voltage con-
trol system detects an unau-
thorised voltage under-us-
age.
Voltage under-usage causes
a programme extension.
Detergent dosage is too
high.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed
Door is not closed.
Childproof lock is activated.
/
is activated.
troubleshooting
No remedial action possible.
▶
Note: If the power supply is stable, the
programme continues to run as nor-
mal.
No remedial action possible.
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the compartment for manual
dosing (not for outdoor clothing,
sportswear or items stuffed with
down).
If intelligent dosing is activated, re-
▶
duce the basic dosage → Page 41.
If you dose manually, reduce the
▶
amount of detergent for the next
washing cycle with the same load.
Call the after-sales service.
▶
→ "Customer Service", Page 64
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
.
Press
.
▶
Close the door.
1.
Press
to start the programme.
2.
→ "Deactivating the childproof
▶
lock", Page 40
Check whether
▶
→ "Buttons", Page 24
Troubleshooting en
/
is activated.
55
Advertisement
Table of Contents
