Setting A Programme; Adjusting The Programme Set- Tings; Saving The Programme Settings; Loading Laundry - Siemens WM14UPH1ES User Manual And Installation Instructions

Hide thumbs Also See for WM14UPH1ES:
Table of Contents

Advertisement

en Basic operation
It may take a few seconds for the
appliance to switch on.
a The appliance performs an audible
function test in the detergent
drawer.
→ "Noise", Page 58
Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.

Setting a programme

Set the programme selector to the
1.
required programme → Page 27.
If necessary, adjust the pro-
2.
gramme settings → Page 38.
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note: Overview of all programme set-
tings:
Requirement: A programme has
been set.
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
38
Note: The setting is saved if you ac-
tivate or deactivate the intelligent
dosing system.

Saving the programme settings

You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
Press and hold
seconds.
Press
to call up the saved pro-
gramme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.

Loading laundry

Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
programme → Page 27.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 34
Open the door.
1.
Ensure that the drum is empty.
2.
for approx. 3

Advertisement

Table of Contents
loading

Table of Contents